How to Select the Correct Drape

The way you select the proper drape for your microscope is to locate the objective lens in the main body of the microscope. (See figure 1)

Using a ruler with either mm markings or cm markings measure the diameter of the lens outside edge to outside edge, this will provide you with the data you need to go to the proper section in the catalog. (See figure 2)

If your measurement is 48mm then you
proceed to the section titled Zeiss® OPMI®
Microscopes.

If the measurement is 65mm you proceed to the section titled Zeiss ® MD/CS/11 Microscopes.

If the measurement is 68mm you proceed to
the section titled Leica ® Microscopes.

Then pick the drape with the width and length that the O. R. feels will adequately cover the microscope.

The other sure method is to get the product number that they are currently using and use the cross-reference guide to find the equivalent MTI drape.

The last method is to call MTI at 1-800-426-9053 and ask for help, we will be very happy to assist in the cross-reference.